+- FreeBeg (https://www.freebeg.com/forum)
+-- Forum: Everything else (https://www.freebeg.com/forum/forumdisplay.php?fid=11)
+--- Forum: Chit chat (https://www.freebeg.com/forum/forumdisplay.php?fid=10)
+--- Thread: ASTM A350 LF2 Flanges and Alloy Steel Flanges (/showthread.php?tid=108000)
ASTM A350 LF2 Flanges and Alloy Steel Flanges - steel456 - 02-23-2026
One of the main characteristics of ASTM A350 LF2 Flanges is that they maintain excellent impact toughness even when exposed to subzero temperatures, which is why they are a typical component in low-temperature and pressure piping systems. These flanges would be made from carbon steel under ASTM A350 Grade LF2 Class 1 or Class 2, and to check the notch toughness of the material, impact testing is quite commonly performed at temperatures as low as -46°C.
Flanges in this category are available in pressure classes from 150 to 2500 and in nominal sizes, they range from ½ inch to 60 inches. Different flange types that are standard include weld neck, slip-on, blind, threaded, lap joint, and socket weld, and they are generally made following the dimension requirements of either ASME B16.5 or B16.47 to ensure that the piping assemblies have interchangeable parts.
Apart from chemical composition that limits carbon and manganese levels to ensure weldability, the flanges also exhibit a tensile strength which usually falls within the range of 485 to 655 MPa. The grain structure is made finer and the ductility is increased through normalizing or quenching and tempering heat treatments, thus, the products become suitable for rigorous refinery and gas processing operations. Engineering companies in Riyadh and Dammam are known to scrutinize the mill test reports, heat numbers, and third-party inspection certificates before placing an order.
Verified suppliers, pressure ratings comparison, and direct communication with stockists holding the compliant forged components can all be done by buyers through the regional B2B platforms.
Alloy Steel Flanges come with better creep resistance and mechanical stability to be able to serve in high-temperature and pressure conditions. Several grades such as ASTM A182 F11, F22, F5, and F9 find their application in petrochemical and power plant projects in Jeddah. Here selecting the right material down to the last detail helps ensure a long service life of the plant, as well as adherence to safety standards and regulations.